Built to last
Our transfers survive 75+ industrial wash cycles.
Independently tested at 60°C with cotton and cotton/poly blends. Pressed on calibrated equipment. Every sheet checked by hand before it leaves the shop.
75+
Wash cycles · 60°C
315°F
Calibrated press temp
100%
Hand-checked sheets
Which DTF for which fabric
The fabric compatibility matrix.
Not every transfer suits every fabric. Pick the wrong one and the print cracks, peels, or never bonds. Here's what works.
| Fabric | Standard DTF | Hard DTF | Pre-Cut DTF | UV DTF |
|---|---|---|---|---|
100% Cotton | Best | |||
Cotton / Poly blend | ||||
100% Polyester Use Hard DTF for true poly | Best | |||
Performance / Nylon | Best | |||
Hard surfaces (glass, metal, plastic) | Best |
Application
Four steps. Twelve seconds on the press.
01
Preheat 5s
Press the blank shirt for 5 seconds to drive out moisture.
02
Place transfer
Position art print-side up on the garment.
03
Press 315°F · 12s
Medium pressure. Use a teflon sheet or parchment.
04
Cold peel
Wait until the carrier is cool to the touch, then peel slow.
Care
Wash inside-out, cold. Tumble low. Don't iron directly on print.
Treat the print like you'd treat a screen-printed graphic tee. Skip bleach and fabric softener. Hang-dry will make it last longer still.